|
RsMesh2Surfs |
Convert a mesh to multiple NURB surfaces |
|
RsMesh2Surf |
Convert a mesh to a single NURB surface; Convert a sub-mesh in the selected mesh to a single NURB surface |
| RsMesh2StarFace |
Automatically convert a star-like mesh to multiple NURBS surfaces |
|
RsPoints2Surf |
Convert a point set to a single NURB surface |
| RsPoints2SurfOption |
Convert a point set to a single NURB surface without GUI |
|
RsCurves2Surf |
Create a single NURBS surface from selected curves |
|
RsAutoNurbs |
Automatic nurbs surfaces generation |
|
RsPointCloud2Mesh |
Create a mesh from point cloud |
|
RsSplitCurveNetwork |
Split the selected curves by their intersection points automatically |
|
RsAutoPoints2Nurbs |
Automatically create a single surface from point cloud |
|
RsUntrimSurf |
Convert trimmed surface to untrimmed surface |
|
RsMesh2SurfDyna |
Create curve network on mesh and create surface patch dynamically |
|
RsMeshAddNodes |
Add more nodes in a mesh |
|
RsPoints2Tris |
Create triangle mesh for terrain model |
|
RsPoints2Plane |
Fit points to a plane |
|
RsPoints2Shpere |
Fit points to a sphere |
|
RsMesh2Plane |
Fit mesh to a plane |
|
RsMesh2Sphere |
Fit mesh to a sphere |
|
RsMesh2Points |
Create point cloud from mesh |
|
RsFaceFromLines |
NURBS surface modeling from lines |
|
RsFaceFromPolygon |
NURBS surface modeling from polygon mesh |
|
RsCurve2Points |
Create points from a curve |
|
RsMergeMeshs |
Merge multiple meshes into a single mesh body |
|
RsSurfaceMatch |
Make the adjcent surfaces be continuous (position,tangent or curvature) on the common edge. |
|
RsFillHoleBySurf |
Fill hole with a surface by selecting surface edges |
| RsSurfaceMapDlg |
This command helps user morph surface(s) from one mesh to another new mesh and fit the new mesh accurately |
|
RsFillMeshholes |
Automatically fill mesh holes with triangle element |
| RsMesh2SurfsByPolygon |
Fit surfaces to mesh based on polygon mesh |
| RsPoints2Surfs |
Fit point cloud to multiple surfaces by curve network |
| RsMeshFromLines |
Construct mesh by selecting lines |
| RsSymmetricPlane |
Compute symmetric plane on selected mesh/point cloud |
| RsSplitPointCloud |
Split point cloud by plane |
| RsMeshBdryCurves |
Extract boundary lines from mesh |
| RsrMeshFlatten |
Unfold 3D mesh into 2D mesh |
| RsrSurfaceFlatten |
Unfold 3D surface into 2D surface |
| RsrCopyMeshOnCplane |
Copy mesh on Contruction plane(CPlane) |
| RsMeshTopoRepair |
Repair mesh topology |
| RsParamSetting |
Parameter setting option |
| RsVertexEdit |
Pick a mesh point and pull it. At the same time, the multi surface corresponding to the mesh moves accordingly |
| RsFaceEdit |
Pick a mesh face and pull it. At the same time, the multi surface corresponding to the mesh moves accordingly |
| RsEdgeEdit |
Pick a mesh edge and pull it. At the same time, the multi surface corresponding to the mesh moves accordingly |
| RsExtrudeFaceOnMesh |
Pick a mesh face and extrude a new mesh face. At the same time, the multi surface corresponding to the mesh is also changed accordingly |
| RsScaleFaceOnMesh |
Pick a mesh face to scale , and the corresponding multi surface of the mesh is scaled accordingly |
| RsRotateFaceOnMesh |
Pick a mesh face to roate , and the corresponding multi surface of the mesh is rotated accordingly |
| RsScaleEdgesOnMesh |
Pick a mesh edge to scale , and the corresponding multi surface of the mesh is scaled accordingly |
| RsSubdivideFaceOnMesh |
Pick a mesh face to subdivide , and the corresponding multi surface of the mesh is subdivided accordingly |
| RsReduceDegree |
reduce surface degree |
| RsImportLas |
import .las file into Rhino |
| RsMorphSurf |
morph surface |
| RsRegister |
register and purchase RhinoResurf |
|
RsHelp |
Rhinoresurf for Rhino help documentation |
