RESURF - solution to nurb surface fittingr Computer Aided Design (CAD)
    Home | Products | Purchase | Change log & Road map | Gallery |   Support | Download |  Contact |  中文

Home > Documentation for RhinoResurf

Table of Contents

1. Introduction

Download and Install RhinoResurf for Rhino 4 (32-bit) and Rhino 5(64-bit)

Loading RhinoResurf into Rhino 4.0 (32-bit) and 5.0(64-bit)

License Agreement

2. Command Reference

Command Reference

RsPoints2Surf

RsMesh2Surf

RsMesh2StarFace

RsCurves2Surf

RsMesh2Surfs

RsAutoNurbs

RsPointCloud2Mesh

RsSplitCurveNetwork

RsMergeMeshs

RsFillMeshholes

RsFaceFromLines

RsFaceFromPolygon

3. Tutorials

Tutorials

Tutorial 1 - Convert a mesh to a surface

Tutorial 2 - Convert a surface from a sub-mesh

Tutorial 3 - Drape a surface over a point cloud

Tutorial 4 - Convert a mesh to multiple surfaces with quad face

Tutorial 5 - Use Fix button to smooth the wavy surface in _RsMesh2Surfs

Tutorial 6 - Convert a mesh to multiple surfaces with trimmed surface

Tutorial 7 - Automatic surfaces (solid) generation from mesh

Tutorial 8 - Single surface from curves

Tutorial 9 - Point cloud to mesh

Tutorial 10 - 6 Steps to create a solid from mesh by using RhinoResurf

Tutorial 11 - Fit mesh to NURBS surface by specifying shape type. ( Command: _RsMesh2Surf in RhinoResurf for Rhino 4 or 5)

Tutorial 12 -morph the geometry from original mesh data to compensated mesh data by using command _RsSurfacemap


 

 

RsSplitCurveNetwork

Menu Button

Resurf > Split Curve Network

Command Name

RsSplitCurveNetwork

This command splits automatically the curve network by their intersection point position.

 

To split the selected curves:

1. Click Split Curve Network from curves from the Resurf menu or type RsSplitCurveNetwork at the Rhino command prompt.

2. Click left-mouse button to select a group of curves, then click right-mouse button, a dialog will show.

3. Set the gap tolerance number , such as 0.0001, click the button Split. The selected will be splitted by their intersection points.

4. Click the button Save to save the splitted as .nc file. This file data will be used in RsMesh2Surfs.

Dialog description:

Gap tolerance :tolerance threhols for checking if curve end points are same, for example, if the distance between vertex A on the end of curve 1 and vertex B on the end of another curve 2 is smaller than 0.0001, vertex A and B are corrected as a same vetex C, curve 1 and curve 2 are connected on vertex C.

Split: do curves splitting .

Save: save the curve network as .nc file for being used in command _RsMesh2Surfs .

Copyright (C) 2007-2012 RESURF All Rights Reserved. Privacy Statement