RESURF - solution to nurb surface fittingr Computer Aided Design (CAD)
    Home | Products | Purchase | Change log & Road map | Gallery |   Support | Download |  Contact |  中文

Home > Documentation for RhinoResurf

Table of Contents

1. Introduction

Download and Install RhinoResurf for Rhino 4 (32-bit) and Rhino 5(64-bit)

Loading RhinoResurf into Rhino 4.0 (32-bit) and 5.0(64-bit)

License Agreement

2. Command Reference

Command Reference

RsPoints2Surf

RsMesh2Surf

RsMesh2StarFace

RsCurves2Surf

RsMesh2Surfs

RsAutoNurbs

RsPointCloud2Mesh

RsSplitCurveNetwork

RsMergeMeshs

RsFillMeshholes

RsFaceFromLines

RsFaceFromPolygon

3. Tutorials

Tutorials

Tutorial 1 - Convert a mesh to a surface

Tutorial 2 - Convert a surface from a sub-mesh

Tutorial 3 - Drape a surface over a point cloud

Tutorial 4 - Convert a mesh to multiple surfaces with quad face

Tutorial 5 - Use Fix button to smooth the wavy surface in _RsMesh2Surfs

Tutorial 6 - Convert a mesh to multiple surfaces with trimmed surface

Tutorial 7 - Automatic surfaces (solid) generation from mesh

Tutorial 8 - Single surface from curves

Tutorial 9 - Point cloud to mesh

Tutorial 10 - 6 Steps to create a solid from mesh by using RhinoResurf


 

 

Download and Install RhinoResurf for Rhino 4 (32-bit) and Rhino 5(64-bit)

Download

You can download RhinoResurf from http://www.resurf3d.com/products.htm After you download RhinoResurf, you will get a file named RhinoResurf.exe.

Installation RhinoResurf for Rhino 5 (64-bit) :

  

Double click the file RhinoResurfx64.exe to install RhinoResurf into your system. In default, the installation directory is ‘C:\Program Files\Rhinoceros 5.0 WIP(64-bit)\Plug-ins\RhinoResurf'. There will be three files in this fold: RhinoResurf_x64.rhp, RhinoResurf.chm and SampleData.zip. The file SampleData.zip contains some sample data which are used in this tutorial. Unzip the file, you will get 10 files: armchair.igs, armchair.nc, armchair.ply, pipe.stl, saddlecurve.nc, saddlemesh.stl, shoubinghead.igs, shoubinghead.stl, skidoo.txt, shoubingcurve.nc and femur.stl. 

 Installation RhinoResurf for Rhino 4 and 5 (32-bit) :

 

Double click the file RhinoResurf.exe to install RhinoResurf into your system. In default, the installation directory is ‘C:\Program Files\Rhinoceros 4.0\Plug-ins\RhinoResurf'. There will be three files in this fold: RhinoResurf1_1.rhp, RhinoResurf.chm, Rhinoresurf.ini, RhinoResurf1_0_84.tb and SampleData.zip. The file SampleData.zip contains some sample data which are used in this tutorial. Unzip the file, you will get 10 files: armchair.igs, armchair.nc, armchair.ply, pipe.stl, saddlecurve.nc, saddlemesh.stl, shoubinghead.igs, shoubinghead.stl, skidoo.txt, shoubingcurve.nc and femur.stl. 

 

 

 

Copyright (C) 2007-2012 RESURF All Rights Reserved. Privacy Statement