RESURF - solution to nurb surface fittingr Computer Aided Design (CAD)
    Home | Products | Purchase | Change log & Road map | Gallery |   Support | Download |  Contact |  中文

Home > Documentation for RhinoResurf

Table of Contents

1. Introduction

Download and Install RhinoResurf for Rhino 4 (32-bit) and Rhino 5(64-bit)

Loading RhinoResurf into Rhino 4.0 (32-bit) and 5.0(64-bit)

License Agreement

2. Command Reference

Command Reference

RsPoints2Surf

RsMesh2Surf

RsMesh2StarFace

RsCurves2Surf

RsMesh2Surfs

RsAutoNurbs

RsPointCloud2Mesh

RsSplitCurveNetwork

RsMergeMeshs

RsFillMeshholes

RsFaceFromLines

RsFaceFromPolygon

3. Tutorials

Tutorials

Tutorial 1 - Convert a mesh to a surface

Tutorial 2 - Convert a surface from a sub-mesh

Tutorial 3 - Drape a surface over a point cloud

Tutorial 4 - Convert a mesh to multiple surfaces with quad face

Tutorial 5 - Use Fix button to smooth the wavy surface in _RsMesh2Surfs

Tutorial 6 - Convert a mesh to multiple surfaces with trimmed surface

Tutorial 7 - Automatic surfaces (solid) generation from mesh

Tutorial 8 - Single surface from curves

Tutorial 9 - Point cloud to mesh

Tutorial 10 - 6 Steps to create a solid from mesh by using RhinoResurf

Tutorial 11 - Fit mesh to NURBS surface by specifying shape type. ( Command: _RsMesh2Surf in RhinoResurf for Rhino 4 or 5)

Tutorial 12 -morph the geometry from original mesh data to compensated mesh data by using command _RsSurfacemap


 

 

Tutorial 9 - Point cloud to mesh


In this tutorial we will create a mesh from point cloud. The created mesh pass through the points on the point cloud.

Step 1 : Start Rhino.


Step 2: Select Import… from the File menu. The import file dialog box is displayed. Browse for the file skidoo.txt (typically located in C:\Program Files\Rhinoceros 4.0\Plug-ins\RhinoResurf\ Samples\) and click Open from the Open dialog box .

 


Step 3: Zoom to the extents of the drawing (View->Zoom->Extents). You will find the point cloud from skidoo.txt imported into the current model. Click Point cloud to mesh from the Resurf menu or type RsPointCloud2Mesh at the Rhino command prompt or click icon at RhinoResurf toolbar.


Step 4: The Rhino command prompt ‘Select point cloud to create mesh' is displayed. Click left-mouse button to select the points from which you would like to create mesh, then click right-mouse button after you selected the points. Wait for a while, a mesh will generate as shown in the following picture .


 


Copyright (C) 2007-2012 RESURF All Rights Reserved. Privacy Statement